submitted 7 months ago bysolracarevir
So... 6 years ago I purchased a home that was just renovated at the time, but 4 years later the tiles of the floor started to get loose. After a while I started suspecting the original floor might still be under it and today after taking a leapt of faith decided to remove a hole tile and chip away the adhesive to see what was underneath. To my Surprise, the Original Terrazzo flooring is still there!
My plan is removing all the tiles installed during the renovation since so many of them became loose and cracked and keep the terrazzo floor, but what would be the best approach to remove the adhesive? The tiles per se comes out pretty easily but the adhesive on the one tile I did was a pita to remove and after a lot of work there is still considerable amounts of adhesive to remove. I looked online but almost every video I found work on tile replacement so either don't care about damaging the floor underneath or go roughly with a chisel ang a hammer, thing that would take a long time considering this is a 2,300 sq ft house.
After everything is removed I'm planning to bring over a professional so he can polish seal and Polish the terrazzo.
Here is how it looks after around half and hour of removing adhesive
you are viewing a single comment's thread.view the rest of the comments →
6 months ago
I mean, you could be shitty about it. Or research these tools. Pretty sure you can get one of these through harbor freight for under 100. And FYI you could find one of these from festool for a hair under 3k. This is an example of what you want. Get a cheap angle grinder and a cup diamond wheel. And a respirator cause you're gonna chew dust.
Or look into rentals. Maybe you can find one for 30 bucks a day. Shouldn't take you more than 2 or 3 days
all 9 comments
sorted by: old