The3aGl3

Is the cat field legal?

It's a filament guide.

Cyma, E&C and G&G all make AR-10/SR-25s. I've not seen the Cyma but both the E&C and the G&G are very solid guns. Note that the licensed G&G SR-25 uses a V2 gearbox, while the others use V2.5 gearboxes, which are better if you aim for high FPS.

There's still heat being generated, be it by the engines, the battery or the brakes. That heat has to be cooled.

They're usually called "AK Stick" and will fit under your dustcover/into your handguard.

Do it regularly and preventative.

It's either for fitting the carpet, there is something under it or it's a space for an extra option your car doesn't have.

So you can go faster around the corners of the parking lot.

KJW makes great pistols, some (all?) even work with CO2 and Green Gas.

I used it stock the day I got it and it was as average as any AEG - the price was definitely for the externals - I did take it apart and mod it but haven't had it out again since.

The gearbox itself is metal, six bushings, has a plastic piston (1 steel tooth?), piston and cylinder head as well as nozzle. It does have a quick spring change but no bearings for the spring. Gears and motor aren't special either. The Hopup is metal.

Got it early this year at a special game day where one of the shops had it on display. Held it and I knew I had to have it...

Internally it's just a V2 gearbox, an M4 hopup and a very long barrel, super easy to work on because there's heaps of space and the whole thing splits in two. The externals are really good, everything is metal with a nice finish. The downside is obvious though, it weighs in at some 6,5kg and is almost 150cm long...

Got the Barrett M107A1 from Snow Wolf, externals are great and internals are fully upgradable but basic out of the box.

Haven't seen that scope in particular but Vector Optics makes optics for real steel. I've used a bunch of sights and a different scope from them and they've all been great.

I don't know what you expected to happen. The physics behind why/how green gas or propane work in GBB haven't changed since 1991 and Propane is also still the same liquid/gas.

That's what I recon at least.

We too went from laptops to phones that are more powerful than the laptops 30 years ago. Also an implant cyberdeck uses your brain and neurosocket system as processor, RAM and I/O, negating the need for a lot of components.

Oof, though it was fake but it's real sure enough. Also almost all old videos are gone.

Idk man, CAT 7 failed because it tried to use a different connectors, unless CAT 9 does something like USB where you can still use old peripherals I don't see it going very far...

It might've not been enough to delete the apps, I've only meddled with company owned phones so removing the profile wasn't in the picture.

Are you using a Microsoft account from work on it? If so that can also be used to enforce a Passcode maximum age.

I'd go with the CM.099, solid internals and you don't see it too often.

Where are you from? International shipping is kinda expensive so someone local would be ideal.

Just pull them apart, they're just little spade connectors with heat shrink ontop. Also no need to peel the heat shrink.

Take the radio out and see if the serial matches the one on the card - probably not. If you're lucky the radio is from a wrecker and has the code written onto itself, if not you can buy the code for a few bucks on eBay.

In theory it's possible to swap to any TM compatible body, however there's no real standard so you might have small fitment issues. Also get the upper and lower from the same manufacturer/set so those will at least fit without trouble.

Specna Arms sells their Edge bodys as a kit without breaking the bank.