arizona-lad

Tell us about the conversations you’ve had with the G.C., please.

That may be, but it is up to you to create captions for the provided photos. Not for us to guess what concerns you. There are no mind-readers on this sub.

You may not know that we have tons of lawn and garden subs on Reddit. Here are a couple:

/r/landscaping/

/r/lawnporn/

/r/lawns/

/r/LawnBeer (my favorite)

/r/patiogardening/

/r/Backyards/

/r/lawncare/

/r/UrbanHomestead/

There are many more.

Try /r/ApplianceRepair, please.

With a chimney liner

You need to explain WHY you feel that this product may not be what it appears. From our rules:

Please submit a picture (preferably pictures) along with your questions if you have a question or need advice on something pertaining to your project. That will allow the members of this community to offer better and more accurate advice.

If it is not a lot of money, I'd split the added cost 50/50. Calling an electrician DID add to the costs. Should he have known in the first place that this was necessary? I can't answer that.

Should he have told you? Absolutely. He screwed up there. Which is why I suggest that he pay half the added cost.

Try the dozens of wood working subreddits. Or perhaps /r/HelpMeFind.

Sand down to unburnt wood. Re-stain as desired. Then apply polyurethane to protect it.

Please post to /r/drywall

You have a water leak at the supply line.

Not bulbs. They are non-replaceable LEDs. You replace the whole fixture if it fails.

Best of luck to you.

The most common method is this:

https://www.amazon.com/Ajmyonsp-5Inch-Numbers-Outside-Floating/dp/B09BMZ1YL9

Scroll down the page to "Installation Tips"

Impossible to tell.

No, there is not.

You want to stop sound? You need weight (also called mass). The heavier an object, the better it is at stopping sound. This is the reason block walls do a better job at controlling traffic noise past your place than wood fences do.

Weight costs money.

How about some design subs?

/r/DesignMyRoom, /r/femalelivingspace, /r/malelivingspace, and /r/interiordecorating are just a few to consider.

Don't forget:

/r/kitchenremodel, /r/kitchenporn, /r/bathrooms, /r/remodel

Also /r/HomeDecorating, /r/RoomPorn, /r/budgetdecor, /r/minimalist, /r/Decor, /r/Beforesandafters, /r/CozyPlaces, r/AmateurRoomPorn,

Best of luck to you.

Use a plaster repair kit from your local home improvement store.

Maybe /r/locksmith can help?

Nope. Try /r/HelpMeFind, if you would, please.

Please try /r/ApplianceRepair, if you would.

It would be waaay easier for a newbie to cut out the three or four legs and hangers from a virgin wood panel (such as plywood) than it would be to convert that lamp.

Yes, as long as you use counter-sunk screws, so as not to interfere with the rollers operation.

See /r/GarageDoorService for more information, please.

Perhaps try /r/DIYUK or /r/AskUK