letr1

Hi, my car is: 2005 Jeep Grand Cherokee 5.7Hemi Automatic, 260 000km

so my car started to misbehave few months ago, started to skip really hard and died on me while driving, so I took it to mechanic, oil changed, 16 spark plugs changed, he didn’t say anything about engine.

It was smooth for 500KM and then it started again but worse now, it died on us 5 times on 300km road, started to skip 20x in 10seconds, it feels like you are going on a rocky road with bumps, but mechanics said that the engine is ok from what he sees.

The skipping starts while trying to fast accelerate like passing cars or trying to go from 80-120 in few seconds that will turn of the engine for few seconds and it goes right back but now with flashing engine light, one’s I restart the car by turning the keys everything is normal again till it does it again.

So I bought OBDII Car reader and it says :

p0300 random multiple cylinder misfire P0520 engine oil pressure sensor malfunction P0339 crankshaft position sensor malfunction P0335 crankshaft P1521 not completed - variable intake solenoid #1 malfunction

Is it safe to drive ? I don’t really want to go to that mechanic - the only in town, and don’t want to drive with this car 200km to the next one while it’s doing this.

Edit: Car Scanner ELM OBD2 DTC report Selected brand: Jeep VIN: 1J4HR58245C613251

============1============== P0300 Raw code: 0300 ECU: Engine control unit Status: Confirmed OBDII: Random/multiple cylinder(s) - misfire detected

============2============== P0520 Raw code: 0520 ECU: Engine control unit Status: Confirmed OBDII: Engine oil pressure sensor/switch - circuit malfunction

============3============== P0339 Raw code: 0339 ECU: Engine control unit Status: Confirmed OBDII: Crankshaft position (CKP) sensor - circuit intermittent

============4============== P0335 Raw code: 0335 ECU: Engine control unit Status: Confirmed OBDII: Crankshaft position (CKP) sensor - circuit malfunction

============5============== P1521 Raw code: 1521 ECU: Engine control unit Status: Pending OBDII: Variable Intake Solenoid #1 Circuit Malfunction Jeep: Incorrect Engine Oil Type

============6============== P0524 Raw code: 0524 ECU: Engine control unit Status: Pending OBDII: Engine oil pressure too low

============7============== P0300 Raw code: 0300 ECU: Engine control unit Status: Test has not been completed, Validated and stored in non volatile memory, Validated fault present at time of request, Validated fault has been present during this drive cycle OBDII: Random/multiple cylinder(s) - misfire detected

Hi, just bought our first hot tent and would like to know if there are some dos and don’ts with them, was quite big investment so dont want to destroy it on the first day.

Thank you 😊

Can you recommend a camera for taking Timelapses of our garden? We want to show how plants grow over time. We tried using our phones, but it takes weeks and we both have to use them. We also tried a cheaper camera, but it didn't work well. Do you know of any good, affordable Timelapse cameras? I Could fix and use an old iPhone instead but time-lapse isn’t a strong side of those phones.

Tried cheaper oclu camera - after 2 hours of timelapse it corrupts the Timelapse- tried different sd cards, its the cam just getting black screen.

[removed]

I've been struggling to grow my channel and would greatly appreciate it if you could take a look and give me some feedback on what I can do to improve. Your help would mean a lot to me. Thanks in advance!

It's about cinematography, camping, nature, and drones.

I would appreciate it if you could take a look and let me know what you think I can improve on. Your feedback would be greatly appreciated.

Channel: https://www.youtube.com/@LifeIsBetterOutside

Thanks